Concrete Crack Filler is a unique solvent free crack sealer designed to protect cracks and joints in concrete pavements against water ingress and the breakdown of pavement surfaces. Concrete Crack Filler penetrates the depth of the crack, filling the void and sealing against moisture and water vapours. Once dried it forms a tough flexible seal that withstands ponding water and vehicle traffic
Betta Concrete Crack Filler
SIZES:
500ml, 1L
Features:
- Solvent free, non flammable, free of hazardous odours
- Penetrates and fills crack depth
- Fast drying properties
- Excellent adhesion to asphalt and concrete
- Forms a flexible non tacky seal
- Excellent water and weather resistance
- Trafficable after 30 minutes in normal ambient conditions (20°C)
FINISHES:
IDEAL FOR:
- Sealing cracks on concrete pavements
- Sealing saw cut concrete joints
- Filling and sealing control joints
- Sealing between concrete pavements and utilities
- Sealing around poles, posts and other penetrations in concrete surfaces
APPLICATION METHOD
Preparation
Surfaces must be clean, sound & stable. Free of moss, grime, oils, animal fats or grease. Remove dust and loose matter in cracks and joints by blower or vacuum. If asphalt is unstable, repairs should be made before crack sealing commences
Application
Shake well before use, then cut tip off of the nozzle and lightly squeeze product into crack. Allow product to settle or smooth product out with spatula
As a guide, 1litre of Concrete Crack Filler will seal cracks 4mm wide and 5mm depth by 40 metre length.
It is not recommended to fill cracks that are wider than 20mm
Drying
In normal ambient conditions of 200C, ready for vehicle traffic within 30 minutes after applying In cooler conditions, drying may be prolonged.
Clean up in water while wet. Once dried product needs to be removed mechanically
Related
Products
Areas OF USE
TIPS & FAQ’s
-
It is recommended to check the surface condition of the seal after 24 hours. If any signs of shrinkage or sinking are evident, re-apply Concrete Crack Filler to the surface until the joint is filled and all shrinkage areas are covered
- Do not apply when rain is imminent
- Not to be used as a sealant over expansion on movement joints
- Do not apply when surface temperature is below 5°C or above 40°C
- Do not mix this product with solvents and do not dilute with water
- Not to be used in areas subject to negative hydrostatic pressure
- Do not mix this product with solvents and do not dilute with water
PROJECTS
DIY Trestle Side Table
DIY Outdoor Side Table
MONOCEL COVERAGE
CALCULATOR
Get our Coverage Calculator
Available FREE ofor Apple & Android phones
LETS CHAT!
OUR DETAILS
HEAD OFFICE
Unit 2, 115 Belmont Avenue
Belmont 6104
Western Australia
Phone: (08) 6272 3800
Fax: (08) 9277 4068