60 Years in the fight against rust

Ranex Rustbuster

A fast working rust treatment formulated to convert rust from a detrimental Iron Oxide to a beneficial Phosphate of Iron. Chemically destroying any rust present and leaving the surface in good condition for painting when dry. Ultimately extending the longevity of the surface and any subsequent coatings.

Trusted by the Australian Navy, government departments as well as automotive, building, fishing, ship building, mining and oil & gas industries.

DRYING TIME:
Between 1hr to 24hrs depending onto application

COVERAGE:
1L= up to 20m2 (Surface dependant)

SIZES:
250ml, 500ml, 1L, 4L, 20L

APPLICATION METHOD &
CLEANUP:
Paint Brush, Roller, Rag or Dipping

Features:

Fast Acting
Chemically destroys rust
Australian made & owned
Proven for over 60 years

FINISHES:

Clear liquid

IDEAL FOR:

Rust Converter
Stain Remover
Cleans Tarnished Surfaces
Cleans Bore Stains and Tannins
Perfect for stainless steel, chrome, brass and copper

APPLICATION METHOD

Rust Conversion

•Remove oil, grease, paint and loose scale

•Always wear gloves and protective clothing when handling Ranex Rustbuster.

•Apply Ranex & allow to dry (do not wipe off) in order to penetrate deep rust & to leave surface in a suitable condition for painting with an oil based primer. As Ranex chemically destroys rust it is not necessary to use rust inhibiting paints. Zinc rich paints are not recommended.

•After initial application wait 24 hours before re-applying as required. Re-application may be required for deep seated rust.

•Apply Ranex to the rust effected areas only, wipe off any excess on surrounding metal or paintwork with a damp cloth.

NOTE: Ranex Rustbuster will convert the rust, however it will not prevent it from re-occuring. Treated surfaces left uncoated may experience further rusting.

NOTE: Avoid contact with vehicle paintwork, Colorbond ®, dry concrete, anti-fouling paint, marble & anodised or galvanised surfaces.

Surface Rust & Tarnishing

•Always wear gloves and protective clothing when handling Ranex Rustbuster.

•Apply Ranex with a damp cloth, sponge or fine steel wool. Wipe off promptly & polish with a dry cloth – this application is ideal for restoring tools, chrome, stainless steel, brass, copper, bikes etc.

•To soak rusty parts, leave for a few minutes & then check until satisfactory. Wipe or wash off on completion.

NOTE: Avoid contact with vehicle paintwork, Colorbond ®, dry concrete, anti-fouling paint, marble & anodised or galvanised surfaces.

Stain Remover & Cleaner

•Always wear gloves and protective clothing when handling Ranex Rustbuster.

• Apply Ranex, allow a few minutes to work & then wipe or hose off – Do not allow to dry. deep seated stains may need further applications & agitation with a brush or light scourer. Spot testing recommended on paintwork & tinted gelcoat

NOTE: Avoid contact with vehicle paintwork, Colorbond ®, dry concrete, anti-fouling paint, marble & anodised, zincalume or galvanised surfaces.

TIPS & FAQ’s

Always wear gloves and protective clothing when handling Ranex Rustbuster.
NOT SUITABLE FOR: Colourbond, paintwork, dry concrete, ant fouling paints, marble, anodized, zincalume or galvanized surfaces

Ranex Rustbuster will have a chemical reaction on contact. Read through instruction details carefully to ensure the correct application is carried out for the project.
If surface appears white after treatment, flush surface with water and detergent, or wipe with a clean cloth until residue is removed.

For Rust Conversion; allow Ranex Rustbuster to work on the surface without wiping off for unto 24 hours. Re-application may be required for deep seated rust, after initial application wait 24 hours before re-applying as required.
For Rust Stains and Cleaning: Do NOT leave Ranex Rustbuster to sit on the surface, If needed work into the surface then wipe off.