Bondall waterbased Paint and Varnish Stripper is an extremely effective non-Methylene Chloride paint stripper ideal for use by DIYers as well as professional users. The non-caustic formulation is simple and easy to use both indoors and out.
Waterbased Paint & Varnish Stripper
1L will cover 1sqm
500mls & 1L
APPLICATION METHOD &
Apply generously with a brush
clean up with water and detergent
- Water based
- Low Evaporation
- No drips, runs or waste
- Suitable indoor & outdoor use
Pour a quantity of Bondall Paint and Varnish Stripper into a suitable container. Apply a generous, thick even coat (do not brush out) at a rate of 1 litre per square metre, onto the surface to be stripped, with a suitable brush.
Leave for approximately 1 hour and apply a second coat.
Once the stripper has softened the paint, scrape off, leaving surface as clean as possible. Repeat process if necessary.
Rub down stripped area using a scrubbing brush or stainless steel pad (DO NOT USE WIRE WOOL). Wash down stripped area with Water Based Turps or detergent and water. Rinse with clean water and allow to dry.
TIPS & FAQ’s
- IMPORTANT: User should wear protective PVC gloves, overalls, splash apron and rubber boots, safety glasses, chemical goggles or face-shield should be worn as appropriate.
- For areas where there are less than 5 layers of paint or varnish, a second coat may not be necessary.
DO NOT MIX OR USE WITH OTHER CHEMICALS
Get our Coverage Calculator
Available FREE ofor Apple & Android phones
Unit 2, 115 Belmont Avenue
Phone: (08) 6272 3800
Fax: (08) 9277 4068