RANEX WEIGHTS RESTORATION – HOW TO

STEP 1.

Start by removing any loose materials using a wire brush or similar abrasive tool.

STEP 2.

Liberally apply Ranex with a sponge, cloth or by soaking the rusted material in a Ranex filled container. Ensure you are using all appropriate safety equipment, such as thick gloves and goggles.

STEP 3.

You should notice an immediate reaction on any rusted sections.

STEP 4.

Allow to dry if you are using Ranex on metal surfaces (If using Ranex to clean bore or fertiliser stains, wash off before drying, as Ranex can burn some pavers and concrete)

Step 5.

Rinse surface with water (a light scrubbing may be necessary). If rust is still present, simply repeat Step 2.

STEP 6.

Paint or coat your new rust-free surface.