Tile & Grout Cleaner

Betta Tilecare Tile & Grout Cleaner is a powerful, ready to use, fast working cleaner. It is a concentrated biodegradable cleaner that removes ingrained dirt, grease, grime and oil deposits without damaging the surface.

Unlike most common cleaners, Tile & Grout Cleaner is non-caustic and non-solvent based, making it safer for the environment. It is ideally suited for use in bathroom, laundry and kitchen areas prior to being sealed with Tile and Grout Sealer. Tile & Grout Cleaner is also useful for general purpose cleaning around the home or workshop.

Australian Madeicon_60_waterbased
Tileguard Tile & Grout Cleaner
Available sizes:250ml and 750ml spray.
Betta Tilecare Tile & Grout Sealer waterproofs tiles and grout without a slippery film coating.
Betta Tilecare Slate Sealer is a clear coating for slate, natural stone and various quarry tiles.
Betta Tilecare Shower Sealer is a clear penetrating solution that waterproofs tiles & grout without a slippery film coating.
Betta Tilecare Natural Look Sealer is a revolutionary penetrating and film forming water based sealer.
Betta Tilecare Tileguard Tile & Grout Cleaner is a powerful, ready to use, fast working cleaner.
Betta Tilecare Mould Rid removes of moss and mould from wet areas.
Betta Tilecare Tile & Grout Sealer - 300g waterproofs tiles and grout via an Aerosol spray.

step1Preparation

Ensure surface is free of dust and loose material before cleaning with Tile & Grout Cleaner.

step2Application

Apply Tile & Grout Cleaner to the affected area and work vigorously with a stiff brush. For heavily soiled surfaces, application may need to be repeated until the stain is removed.

step3Drying

Leave for 5 - 10 minutes then wash away with water. Do not allow to fully dry out before washing off.

Features & Benefits

  • Ready to use
  • Safe for the environment
  • Fast acting

Ideal For

  • kitchen
  • bathroom
  • and laundry areas

Areas Of Use

MouldRid
MouldRid
Bondall MouldRid

Technical

Apply: Spray
Coverage: 1L = 3-4m2
Apply: 1 Coat
Drying Time: Leave on surface for 5 to 10 minutes

Tips

  • Always test on a small inconspicuous area, to ensure the product achieves the desired result, prior to applying to the entire area.
  • Tileguard Tile & Grout Cleaner may not remove old or established stains and may leave shadowing of the stain after removal.
  • Coverage is 3-4 square metres per litre depending on the porosity and texture of substrate.

Clean - Up

Cleaning is as easy as 1-2-3!

Safety