
Bondall Pot & Ornament Sealer
Bondall Pot & Ornament Sealer is the ideal choice for sealing plant pots and garden ornaments. It will seal, bind, protect and waterproof most pot surfaces while still retaining a clear natural look. Bondall Pot & Ornament Sealer increases surface hardness, reduces staining and soiling, resists algal and fungal growth, and offers outstanding exterior durability.


Preparation
Surface should be thoroughly clean, as any stains will become more apparent once sealed.
Soiling, grease and oil stains can be removed using Bondall’s environmentally friendly Pot & Ornament Cleaner.
Application
Shake container before use.
Hold nozzle approximately 300mm from surface.
Apply the first coat neat and evenly. Proper penetration of the first coat is very important.
Drying
Allow a minimum of 4 hours between coats. At least two coats must be applied.
Allow to dry for 48 hours before filling with soil etc.
Features & Benefits
- Seals, binds, protects and waterproofs.
- Perfect for most vertical masonry surfaces.
- Provides a clear natural finish.
- Increases surfaces hardness.
- Prevents staining and soiling.
- Resists algal and fungal growth.
- Very durable.
Ideal For
- Outdoor Pots and Ornaments
Areas Of Use



Technical
Waterproofing Level
Durability of Coating



Note:
This product is not designed to be used as a waterproofer for a water holding vessel e.g. a pot to be used as a
pond for fish etc. and is not suitable for glazed surfaces.
Tips
- Always test on a small inconspicuous area, to ensure the product achieves the desired result, prior to applying to the entire area.
- If running occurs, wipe down with a damp cloth.
- Care should be taken to apply evenly and not too heavily on pitted surfaces.
- Bore & rust stains, efflorescence stains and moss & mould growth should be treated prior to sealing.
Clean - Up
Cleaning is as easy as 1-2-3!
- Wash your equipment in fresh water with a drop of detergent.
- Rinse with clean water.
- Seal washings and unwanted leftovers and dispose of responsibly.
Safety
- Store out of reach of children.
- Skin: wash the area well with running water.
- Eyes: flush the eye with running water for several minutes, contact your doctor.
- Breathing: use in a well ventilated area; when spraying, use a suitable respirator.
- Swallowed: drink water, do not induce vomiting and contact your doctor or the Poison Information Centre on 13 11 26