Bondall Mould Rid Applications

Surface Preparation

No special preparation.

Applications

Apply Mould Rid undiluted to the entire surface, not just too visible areas as some spores may still be present. To en- sure complete kill and eﬀectiveness, this treatment should be allowed to remain on the surface for at least 24 hours.
After this time the surface should be washed down with clean water.
Ensure the surface has dried completely before commencement of any painting/ coating.

Coverage

Approximately 3-4 square metres per litre depending on porosity and texture of substrate.

Thinning

Use undiluted for ﬁrst application. Dilute 1 part to 2 parts water for second or subsequent applications.

Clean Up

Clean all equipment promptly with warm water and a little detergent followed by a fresh water rinse. Do not pour contents or washings down drains or sinks.

Precautions/ First Aid

It is recommended that normal personal protective clothing should be worn, including coveralls, impervious gloves and gog- gles. Avoid unnecessary skin contact and inhalation. Use a suitable respirator if spray application is employed. If swallowed, contact a doctor or the Poison Information Centre on 13 11 26. Give a glass of water to drink and do not induce vomiting.

Should skin contact occur wash immediately and very thoroughly with water. Seek medical attention if irritation occurs. If eye contact occurs hold eye open and wash continuously with clean water for at least 15 minutes. Seek medical advice. Refer to MSDS for more details.