Hydrochloric Acid

Hydrochloric Acid

Bondall's Hydrochloric Acid is designed for the following purposes:
  • Etching Concrete Floors
  • pH Adjuster for Pool Water
  • Brick/Metal Cleaning

Sizes:

500ml, 1L, 5L, and 20L.
Find out more about Hydrochloric Acid at the dedicated website: Acid Solutions

For Brick Cleaning & Etching

Remove lumps of cement with a scraper. Wet bricks thoroughly with water to prevent acid soaking into the bricks – failing to do so could result in bricks turning yellow/ green. Mix 1 part Hydrochloric Acid with up to 10 parts water. Apply acid solution with a broad brush and then rinse off with water once chemical reaction (frothing) has ended.

As a pH Adjuster for Pool Water

Add 100ml of Hydrochloric Acid per 40,000 litres of pool water to lower pH by 0.1 point (i.e. 7.9 to 7.8). Run pool pump for at least 1 hour after adding the acid.